Build a Kavadiframe

Kavadi frame

List to buy
Alluminium / 30mm x 3mm
4x 180 cm The wings
4x 33 cm The outside of the wings
4x 100 cm The the wings and woodentop support
2x 108 cm Bending the wings sides
2x 117 cm Bending the wings front & back

L shape iron / 15mm x 3mm
4x
8cm x 8cm For the beld holding the 100cm parts

Wood
Upperpart (roof)
33cm x 33cm x 1,5 cm

Wood
Shoulderparts
2x
33cm x 7 cm

Belt of 10 cm width, to hold a part of the frame tension.

Kavadispears
Plain iron
30 or 40x 115cm/ Ø 6mm

Nut and bolts
Bolt
20x
20mm x Ø 5mm
4x
30mm x Ø 5mm
Nuts
24 x
Ø 5mm


Drilling and bending

The 180cm parts have to drilled on each side from the outside 15mm x15mm holes of Ø 5mm.
From the middle to each side left and right 150mm holes of Ø 6mm
From the middle to each side left and right 280mm holes of Ø 14mm contineuing 66mm so you have 9 holes on each side.

The 33cm parts have to drilled on each side from the outside 15mmx15mm and in the middle with holes of Ø 5mm.

The 100cm parts have to drilled on each side from the outside 15mmx15mm holes of Ø 5mm. Both sides bended on 30mm / 90 degrees

The 108cm parts have to drilled on one side at 15mm and the other side at 60mm,
Ø 5mm. 1 side bended on 30mm / 145 degrees other side bended on 120mm / 145 degrees. Both bended to the same side.

The 117 cm parts have to drilled on 15mm and the other side at 70mm, Ø 5mm.
1 side bended on 30mm / 145 degrees other side bended on 170mm / 145 degrees. Both bended to the same side.

L shape iron
1 time drilled in each side in the middle, Ø 5,5mm.

Wood
Upperpart (roof)
Every corner drilled on 15mm x15mm- Ø 5,5mm

Your own size.
The measurments wich I gave are based on my size.
Based on my shoulder measurements.
To make your frame your size, you have to measure the size from the middle of your shoulder to the other middle. This affects 2 parts in the frame.
The wooden part and the outerparts of the wings 33cm.

Example.
When your size from one to the other middle of the shoulder is 24 cm
The wooden part can be 27cm square and the outerparts have to be 27cm
The drilling part gonna be the same.
The rest is not affected

Check for cm to inches,the right side bar!
Down here is the scale for mm to gauge.

Questions?
I help were i can!


Kavadimail.